Updated 2026

Voluum Automizer: Complete Auto-Rules Guide 2026

Stop babysitting campaigns. Learn how to set up Automizer rules that pause losers, scale winners, and push whitelists/blacklists automatically — without touching a dashboard at 2am.

Automate Your Campaigns with Voluum

Automizer is available on Startup plan and above. 14-day free trial included.

Start Free Trial →

Table of Contents

  1. What Is Voluum Automizer?
  2. How Automizer Works
  3. Step-by-Step Setup Guide
  4. Rule Types and Use Cases
  5. Whitelist & Blacklist Automation
  6. Best Practices
  7. FAQ

What Is Voluum Automizer?

Voluum Automizer is the campaign automation engine built into the Voluum ad tracker. It connects Voluum directly to your traffic source accounts via API and executes predefined rules on your behalf — pausing campaigns, adjusting bids, updating whitelists and blacklists, and sending you notifications when performance thresholds are crossed.

Before Automizer, affiliates and media buyers had to manually monitor campaigns, spot underperformers, log into each traffic source separately, and make adjustments by hand. In a world where campaigns can drain a daily budget in hours, that manual cycle is too slow and too prone to human error. Automizer eliminates that bottleneck entirely.

The system works on if/then logic. You define the condition ("if cost exceeds $30 and conversions equal zero over the past 6 hours") and the action ("pause campaign at traffic source level"). Voluum does the rest, checking your metrics every 15 minutes against every active rule.

Automizer is available on Voluum's Startup plan and above. It is not included in the entry-level Profit plan, which is worth noting if automation is a core requirement for your operation.

How Automizer Works

Automizer operates in three layers: integration, monitoring, and execution.

Layer 1 — Traffic Source Integration

Automizer connects to your traffic source via their API. Once connected, Voluum can read campaign data (cost, clicks, impressions) directly from the source and write actions back (pause, resume, bid changes) in real time. Currently supported integrations include PropellerAds, Taboola, Outbrain, Exoclick, TrafficStars, MGID, Zeropark, RichAds, and 30+ more. Each integration requires an API key generated from your traffic source account settings.

Layer 2 — Metric Monitoring

Automizer checks your campaign metrics against rule conditions at regular intervals (every 15 minutes). You define the time window for data evaluation: last 1 hour, 6 hours, 24 hours, or 7 days. A 1-hour window reacts fastest but is more sensitive to statistical noise. A 24-hour window is more stable and better for rules based on daily spend limits.

Layer 3 — Automated Execution

When a condition is met, Automizer executes the defined action. For campaign-level actions (pause, resume, bid adjust), it communicates directly with the traffic source API. For list-based actions (add publisher to whitelist/blacklist), it updates your lists in Voluum and optionally pushes them to the traffic source. All actions are logged in the Automizer action history so you can audit exactly what happened and when.

Step-by-Step Setup Guide

  1. Connect your traffic source: Navigate to Automizer > Traffic Sources in Voluum. Click Add Integration, select your network from the dropdown, and enter your API key. Save and verify the connection status shows green.
  2. Create a new rule: Go to Automizer > Rules and click New Automizer Rule. Give it a descriptive name such as "Pause — High Cost No Conversion / 24h".
  3. Set the rule target: Choose whether the rule applies to a campaign, offer, lander, or publisher ID source. For spend-based pause rules, campaign level is most common.
  4. Define conditions: Add your metric conditions. You can combine multiple conditions with AND/OR logic. Example: Cost > $25 AND Conversions = 0 AND time window = last 24 hours.
  5. Choose the action: Select from: Pause, Resume, Send Notification, Add to List, or Adjust Bid (for supported networks). Bid adjustment requires a percentage or fixed value.
  6. Set frequency control: Define how often the rule can trigger. For pause rules, "once" per evaluation window is appropriate. For bid adjustment rules, add a cooldown of at least 1 hour to prevent oscillation.
  7. Activate and monitor: Enable the rule and monitor the Action Log (Automizer > Actions) for the first 48 hours to confirm it behaves as expected before scaling up.

Need Automizer? It's available from the Startup plan. 14-day free trial, no credit card required.

Start Free Trial →

Rule Types and Use Cases

Rule TypeCondition ExampleActionBest For
Loss StopperCost > $30 & Conversions = 0 / 24hPause CampaignCutting dead campaigns automatically
Daily Budget GuardCost > $50 / todayPause CampaignHard daily spend caps
ROI FloorROI < -30% & Clicks > 500 / 24hPause + NotifyProtecting margin on scaled campaigns
Winner ScalingROI > 50% & Conversions > 10 / 24hIncrease Bid 10%Scaling profitable campaigns
Source BlacklistPublisher cost > $5 & Conversions = 0Add to BlacklistEliminating bad traffic sources
Source WhitelistPublisher ROI > 30% & Conversions > 3Add to WhitelistBuilding proven source lists

Whitelist & Blacklist Automation

One of Automizer's most powerful features is automated list management. Instead of manually tracking which publisher IDs or subIDs are performing, you define thresholds and let Automizer maintain your lists automatically.

To set up a publisher-level blacklist rule: go to Automizer Rules, select "Publisher" as the element type, set your condition (e.g., publisher cost > $8 with zero conversions in the last 48 hours), and choose "Add to Blacklist" as the action. Enable the option to push the list back to your traffic source, and Voluum will automatically exclude those publishers from your campaign targeting.

Whitelist rules work the same way in reverse. A common setup: add a publisher to your whitelist when they generate 3+ conversions with positive ROI over 7 days. Once your whitelist is populated with proven publishers, you can create a whitelist-only campaign that targets exclusively those sources — often your highest-ROI traffic.

See also: Complete Whitelist & Blacklist Guide

Best Practices

Frequently Asked Questions

What is Voluum Automizer?+

Automizer is Voluum's campaign automation module. It connects Voluum to your traffic sources via API and lets you create rules that automatically pause, resume, or adjust campaigns based on real-time performance data.

Which traffic sources support Voluum Automizer?+

Automizer natively integrates with PropellerAds, Taboola, Outbrain, Exoclick, TrafficStars, MGID, Zeropark, and 30+ other networks. Each integration requires an API key from the traffic source dashboard.

Can Automizer pause a campaign automatically?+

Yes. You can create a rule such as 'if cost > $20 AND conversions = 0 in the last 24 hours, pause campaign'. Voluum will execute this automatically without any manual intervention.

Do I need a specific Voluum plan for Automizer?+

Automizer is available on Startup and higher plans. The Profit entry-level plan does not include Automizer access.

How often does Automizer check conditions?+

Automizer checks your rule conditions every 15 minutes by default. You can set time windows (last 1h, 6h, 24h, 7 days) for the metrics it evaluates.

Can I use Automizer to build whitelists and blacklists?+

Yes. Automizer can automatically add converting publisher IDs to a whitelist or add non-converting ones to a blacklist, then push those lists back to your traffic source automatically.

ℹ️ Evidence Notes

Checked (public sources): Automizer feature availability per plan from official Voluum plan comparison page; supported traffic source integrations from official Automizer documentation.

Not independently tested: Rule execution latency, API reliability under high load, actual automation outcomes.

Reader should verify: Current plan requirements for Automizer, supported traffic source list, API key generation process in your specific traffic source account.

Last checked: May 2026