Push Traffic 2026

Voluum for Push Traffic: Complete Campaign Setup & Optimization Guide

Push traffic gives you massive reach at low CPCs — but without proper tracking you are flying blind across thousands of publishers. This guide covers Voluum setup, postback configuration, and publisher-level optimization for PropellerAds, RichAds, and Evadav.

Track Every Push Publisher with Voluum

14-day free trial. Native integrations with PropellerAds, RichAds, and more.

Start Free Trial →

Table of Contents

  1. Why Push Traffic Needs a Tracker
  2. Campaign Setup in Voluum
  3. Token Configuration by Network
  4. Postback & Conversion Tracking
  5. Publisher-Level Optimization
  6. Automizer for Push Automation
  7. FAQ

Why Push Traffic Needs a Tracker More Than Any Other Format

Push traffic operates at scale by definition. A typical RON (Run of Network) push campaign on PropellerAds reaches thousands of individual publisher websites simultaneously. Each publisher sends you different quality traffic at different volume levels. Without click-level tracking, every publisher looks the same — and you have no way to know which ones are profitable and which are draining your budget.

Voluum solves this by capturing the publisher ID (zone ID, site ID, or sub ID depending on the network) on every click. Once you have publisher-level data, optimization becomes methodical: you identify the 20% of publishers driving 80% of your conversions, build a whitelist of them, and concentrate your budget there. Meanwhile, you blacklist the non-converting publishers and stop paying for their traffic.

This cycle — track, identify, whitelist, scale — is the core optimization loop for push traffic. Voluum provides the infrastructure for all of it, including Automizer automation that maintains your lists without manual intervention.

Campaign Setup in Voluum for Push Traffic

  1. Create your push network traffic source in Voluum: Go to Traffic Sources and search for your network. PropellerAds, RichAds, Evadav, TrafficStars, and Adcash all have pre-built templates that configure the correct token parameters automatically.
  2. Create your campaign: Link your traffic source, affiliate network, landers, and offer. For push traffic, start with 2-3 lander variants for split testing. Push traffic users have seen many ads — creative differentiation matters more than on other formats.
  3. Get your Voluum campaign URL: This tracking URL goes into your push network as the ad destination URL. It should include the network's tokens for publisher ID and cost so Voluum captures those values per click.
  4. Configure your push network campaign: Create the campaign in PropellerAds/RichAds, paste your Voluum URL as the destination, and add the click ID and publisher ID tokens. The exact parameter names vary by network — see the token table below.
  5. Set your bid: Push traffic CPCs typically range from $0.001 (Tier-3 GEOs) to $0.05+ (Tier-1 GEOs like US, UK, AU). Start at a moderate bid to win enough volume for testing without overpaying in early stages.

Token Configuration by Push Network

NetworkPublisher/Zone ID TokenClick ID TokenCost Token
PropellerAds{zoneid}{clickid}{cost}
RichAds{site_id}{clickid}{cost}
Evadav{site_id}{sub_id}{price}
TrafficStars{site_id}{click_id}{cost}
Adcash{zone_id}{tid}{cost}
Zeropark{zoneid}{clickid}{cpc}

Example Voluum destination URL for PropellerAds: https://go.voluum.biz/CAMPAIGN_ID?pub={zoneid}&cost={cost}&clickid={clickid}

Voluum has official PropellerAds and RichAds integrations. Start your 14-day free trial.

Start Free Trial →

Postback & Conversion Tracking for Push

Setting up postback for push traffic follows the same process as any affiliate tracking setup. The key push-specific consideration: your affiliate offer must support S2S postback. Most CPA networks do. If your offer only provides a JavaScript pixel, you will have incomplete conversion data for mobile push traffic — consider switching to an offer with S2S support.

Full postback setup instructions: Postback URL Setup Guide.

Once postback is configured, every conversion in Voluum will show you exactly which push publisher, zone ID, lander, and offer combination drove the result. This is the foundation of all further optimization.

Publisher-Level Optimization for Push

After running your push campaign for 24-48 hours with at least $50-100 in spend, you have enough data to start optimization. Here is the process in Voluum:

  1. Open Reports and group by Publisher ID (or Zone ID).
  2. Sort by Cost descending. You will see which publishers are spending the most.
  3. Apply your blacklist threshold: Any publisher with spend > 3x your target CPA and zero conversions is a blacklist candidate. For a $20 CPA offer, blacklist any zone that spent $60+ with no conversions.
  4. Identify converting publishers: Any publisher with 2+ conversions and positive ROI goes on your whitelist tracking list. At 5+ conversions and consistent ROI, add them to your whitelist.
  5. Export and upload blacklist: Download the blacklist IDs and upload them to your PropellerAds/RichAds campaign exclusions. Or use Automizer to do this automatically.

After the first round of blacklisting, you typically see a 20-40% improvement in campaign ROI — simply by stopping spend on the worst performers. See also: Whitelist & Blacklist Guide.

Automizer for Push Traffic Automation

Manual push optimization works but requires daily attention. For campaigns spending $100+/day, Automizer pays for itself in hours saved per week.

Recommended Automizer rules for push traffic:

With these four rules active, your push campaigns optimize themselves overnight. You wake up to a cleaner campaign structure with fewer wasted impressions and more budget concentrated on proven publishers.

Frequently Asked Questions

What is push traffic and why does it need a tracker?+

Push traffic is ad traffic delivered via browser push notifications. Users who opted into a site's notifications receive ads directly on their device. Because push ads go to large numbers of subscriber IDs across many publishers, a tracker is essential to identify which publishers and subscriber segments convert.

Which push networks work best with Voluum?+

Voluum has official integrations (via Automizer) with PropellerAds, RichAds, Evadav, Adcash, and TrafficStars — all major push networks. Redirect tracking works with any push network; Automizer automation requires an official integration.

What is a subscriber ID in push campaigns?+

A subscriber ID is the unique identifier for a user who opted into push notifications on a specific publisher website. It is the push-traffic equivalent of a publisher ID and is the key variable to optimize at the traffic source level.

How do I optimize a push campaign in Voluum?+

Group your Voluum reports by Publisher ID and Subscriber Segment (if available). Identify publishers with positive ROI and add them to a whitelist. Blacklist publishers with high spend and zero conversions. See our whitelist/blacklist guide for the full process.

What is the typical conversion rate for push traffic?+

Push traffic conversion rates vary widely by offer type: 1-3% for simple lead gen offers, 0.1-0.5% for direct purchase offers. Push traffic tends to be cheaper per click than native or search, which makes the economics work even at lower conversion rates.

Should I use redirect tracking or direct tracking for push traffic?+

Most push networks accept redirect tracking URLs as destination URLs without restrictions. Redirect tracking is simpler to set up for push campaigns. Direct tracking is not typically required for push networks unlike Facebook or TikTok.

ℹ️ Evidence Notes

Checked (public sources): Push network token formats verified against PropellerAds and RichAds official API documentation. Voluum traffic source template availability from Voluum integrations page. Automizer push network integration support from official Voluum Automizer documentation.

Not independently tested: Actual campaign ROI improvements from blacklisting; typical CPCs for specific GEOs and verticals; publisher ID count at which whitelisting becomes effective.

Reader should verify: Current push network token names (networks update these periodically); CPC ranges for your specific GEO and offer vertical; whether Automizer supports your specific push network's API version.

Last checked: May 2026